• Specification & Dimensions

• Fabricated of grade 304 stainless steel alloy 18-8
• Two units equal one set
• Railing Measurements: 450mm x 450mm
• Tubing is 32mm diameter x 18 gauge (1.2mm)
• Flange is 3mm thick and shall be Heliarc welded to tubing with a continuous concealed bead and shall have three (3) 7mm diameter mounting holes
• Cover plates to conceal flange and fixings are 22 gauge (0.8mm) stainless steel
• Fully welded construction finished in satin stainless steel finish to promote durability and reliability
• Designed for the safety, security and convenience of the physically disabled
• Strong Ø75 fixing flanges
• Easy to install on most building surfaces
• Grab Rails provide flush mounting flanges which are fully welded to the tube ends
• This results in a single structural unit that is designed to give maximum strength, security and user confidence to support greater loads
• Attractive stainless steel cover plates to conceal the flange and fixings

Recommended Instalation Height:
To comply with Australian Standards AS 1428.1, grab rails must be fastened a minimum distance of 800mm from the floor, with 600mm of clear space above the rail and to with stand a force of 1100N at any point from any direction.